|
Serving the Globe since
the last millennium |
Track & Confirm 
Here
Services |
Products |
Ordering |
Links |
Support |
| About Us |
Care and Use information
|
click to return to SlideRack product sheet |
| The
Slide rack can be used with the availble labware definitions The
Z height is 12mm on the Biomek, 7 mm above any standard labware holder.
The footprint is that of a 96 well plate. 4 slides must be placed into the holder to maintain postion. Chemical cleaning is recommended after use. The device can be placed atop any ACME-Automation thermal device or other various thermal devices meant to accept titer plates. Sponge material may be placed under the rack to allow for any Z overtravel.
|
