click to return to TubeSnake product sheet

Kit Includes a  Cable guide and mounting hardware. Installs in minutes. Why didn’t this come with it in the first place!

Installation

1. Fasten through the cable guide to the existing mounting bracket and bend to adjust angle.
2. It is easiest to route the tubing through the guide before step 3
3. Remove existing pod cover screw and install #6 Self Tapping screw and star washer.
4. Position guide and tighten down all the screws.
5. The guide will sag, but will function as expected.

In operation the tubing will remain free of obstructions and jamming. This will prolong tubing life and improve dispensing by minimizing drippage.