Serving the Globe since the last millennium
And
Beyond

 
Track & Confirm pmlogo.jpg (2267 bytes)
fedex_express.gif (484 bytes)
Here


Services

Products

Ordering

Links

Support

Contact

About Us

 Care and Use information

             click to return to WasteHole product sheet

Waste HoleÔThis is a device for draining unwanted fluids into a waste vessel. The device fits neatly into a Titer format holder so it is compatible with various liquid handlers. It has an integrated lid to allow for tip touching if dispensed liquids.

Automated Use:Define the WasteHoleÔ using the respective software utilities for your Liquid handler. To do this increase the definition height Z + 25.15 mm. The 96 hole positions in the lid are the same as a 96 well plate. So you may just want to edit an existing plate definition.

Dimensions:

Device Height: ……….. 36.5 mm

Tip Touch Height……….. 10.0 mm from Top

Positions as a titer format plate at the base.

Installation:Insert the length of tubing onto the barb fitting. Relocate the fitting if the end port if desired. Route the tubing DOWN to a waste bottle. ( you may want to connect a vacuum source if you need to route the tubing Up). Test the flow path with water before use. If you encounter any difficulty with this integration then contact Jeff Cahlik at (423) 452-0893

 

 

{ ACME-Automation Home }


Pricing subject to change without notice.
Contact us for current pricing or Quotation
ã
Copyright 1999-2007 ACME-Automation.com, All rights reserved.