|
Serving the Globe since
the last millennium |
Track & Confirm 
Here
Services |
Products |
Ordering |
Links |
Support |
| About Us |
Care and Use information
|
click to return to uChannel12 product sheet |
| 12
Channel reservoir: uChannel12Τ
This is a low volume reservoir for use with various automated liquid handlers and manual laboratory use. This reservoir uses ACME-Automations unique MicroTrough to create an ultra low wetting volume for expensive reagents. Tip touching can be performed to the front to minimize ectotip residuals. It is Multimek position 5 friendly. Automated Use: Define the reservoir using the respective software utilities for your Liquid handler. To do this refer to the following dimensions. *Tip: the well access locations , Length and width dimensions are the same as a standard 96 well microplate. Dimensions:
Specifications: Material: . PolyPropylene Channels . 12 colums Channel capacity .. 9 ml per Channel Minimum wetting .. 10ul per Channel Operation: For the best operational performance, the reservoir base must remain as flat and level as possible. Foil and wax seals can be utilized to reduce evaporation Clean-up Chemical Sterilization: Use of most commonly available disinfectants can be used. Avoid prolonged exposure to the more aggressive disinfectants to avoid any surface cracking. Autoclaving: Rinse clean in DI water prior to periods of autoclaving. 121° C / 15 psi. Cycle length of 15 minutes initial duration. The cycle period varies according to the type of chemical / material exposure. Proper periods can only be determined with experience. All plastic components have a limited lifetime. |
