Products

If you don't see it here...Let us see if we can build it for you....In addition to our Standard Product offering , we have many custom solutions not posted here. Use the contact page for ideas and requests.

Reservoirs:	Biomek™2000 Modules
*Twinivoir™*	A 2 channel Modular reservoir for the Biomek™2000 / FX and other liquid handlers. This reservoir uses ACME-Automations unique uTrough™ design for a minimum wetting volume.
*TwinivoirX2™*	A dissected 2 channel Modular reservoir for the Biomek™2000 / FX and other liquid handlers. This reservoir uses ACME-Automations unique uTrough™ design for a minimum wetting volume.
Reservoirs:	96 channel head optimized
Minivoir 96 ™ w/ EvaprCap™	A 96 channel optimized low volume reservoir. With a low evaporation lid. This reservoir uses ACME-Automations unique uTrough™ design for a minimum wetting volume. Biomek FX ™compatible. Multimek96 position 5 friendly.
*uChannel 8™*	A 8 channel, low volume reservoir optimized for 96 channel pipetters. For use with various liquid handlers. This reservoir uses ACME-Automations unique uTrough™ design for a minimum wetting volume.Biomek FX ™compatible.
*uChannel 12™*	A 12 channel, low volume reservoir optimized for 96 channel pipetters. Use with various liquid handlers. This reservoir uses ACME-Automations unique uTrough™ design for a minimum wetting volume.Biomek FX ™compatible.
uChannelQuad™	A Reservoir separated into 4 quadrants, low volume reservoir optimized for 96 channel pipetters. This reservoir uses ACME-Automations unique uTrough™ design for a minimum wetting volume. Use with various liquid handlers.Biomek FX ™compatible.
ControlVoir™	A 3 compartment, low volume reservoir optimized for 96 channel pipetters. It allows standards or controls to be placed in the first and last columns. See Installation and use documentation for max. volumes.
WasteHole™	A High capacity 96 channel dump site for liquid waste. A 3/8" tube fitting for connection to a off deck waste vessel is incorporated at 2 locations for use on various liquid handlers. Biomek 2000, Biomek FX and Multimek compatible.
Reservoirs:	384 Head optimized
*Minivoir38Four™*	A 384 channel optimized low volume reservoir. This reservoir uses ACME-Automations unique uTrough™ design for a minimum wetting volume. Biomek FX ™compatible. Multimek96 position 5 friendly.
*uChannel16*™	A 384 channel optimized low volume reservoir. This 16 channel reservoir is designed for a minimum wetting volume. Biomek FX ™compatible. Multimek96 position 5 friendly.
Reservoirs:	Mixing and Recirculating
*Turbulator2™*	The Turbulator2 is a low volume reservoir with an integral non-magnetic 384 orifice mixing device. Operating on a vacuum diaphragm pulse technique. it pulses ~4 times a second with an adjustable amplitude. Biomek FX ™compatible.*This product replaces the Turbulator96
*Filling Station™ 96/384*	A sensor controlled reagent filling station. Driven by a compact peristaltic pump. Many options for flow and reservoir design are offered upon request.
Evervoir96™	This device is a continuous Recirculating reservoir in a titer plate format. 1-10mL a minute refill rate. Offered in a standard or UV sensitive version. Biomek 2000, FX Multimek compatible. Includes a 96 channel low evaporation lid that allows tip touching. (also available in 384 well format .)
Racks
Custom Solutions for all Liquid handlers	If you don't see it. Don't despair, we may have already created a custom solution. We construct racks for MALDTOF plates, Tubes , Tips, Specialized labware components, Glass Slides. Hundreds of components in stock. Components can be constructed of various materials. Customs are affordable and always available in less than 30 days.
*Slide Holder*	Holds 4, 1 X 3 standard microscope slides in a titer format for processing on any liquid handler. Can work in conjunction with any ACME-Automation thermal device.
1.5/2mL by 48 position rack #C5027D $250ea.	This rack is designed to operate with 2 separate custom definitions on the Biomek 2000 .It will accommodate the Naglene 2ml skirted tubes part # 342800-0020, 1.5 ml conical tube. Other tubes with 10.3mm max. diameter
50mL X 6 Position Rack #CR7011 $250	Large 50ml tubes or any 28.4mm max diameter tube can be placed in this rack for the Biomek 2000./ FX
17mm X 24 Position Tube rack. C5037 $250 ea.	Various 17mm diameter tubes can be inserted into this Titer format Polyethylene rack. Biomek 2000/FX
7mL x 84 positions CR7012 $650 ea.	Any 15.5mm diameter or smaller tube can be placed in this rack for the Biomek 2000. 2 deck locations.
50mL X 24 positions. CR7010 $650 ea.	Large 50ml tubes or any 28.4mm max diameter tube can be placed in this rack for the Biomek 2000. 2 deck locations.
High density replication
*U.L.V. HDR Pins*	Ultra low volume pins for use with the Biomek™2000 and Biomek FX™ HDR Tools.
Thermal devices
UniThermX™	For use with virtually all handlers or benchtop use. Uses a refrigerated recirculator.
Thermalizer™	A Biomek 2000, -4°C to 60°C Titer format thermal device for labware and thermal adapters,. Uses a refrigerated recirculator.
Matterhorn™	A -4°C to 60°C Titer format thermal device for labware mounted atop a Biomek FX ALP, In addition a Pneumatic vibrator is incorporated to facilitate mixing within wells of labware resting in the thermalwell.
ThermALP	A -4°C to 60°C Titer format thermal device for labware, user installable on top of a Biomek FX ALP. Thermalwell walls can be added to house various plate heights.purchased separately.
*CHALP*	A -4°C to 60°C Titer format Biomek FX thermal device .This is a lower cost alternative to the OEM thermal device .This device integrates with ACME-Automation thermal adapters. It mounts under a Beckman Coulter Static FX ALP. It has an adjustable Z for various plate geometry.
*TiterGarage™*	A passive plate cooler. It fits in a standard titer plate holder so it can be used stand alone or on various liquid handling platforms.
*PAK-ICE™*	A passive Modular reservoir holder, chilling device.
*ReactorAdapter™*	Reaction plate adapter for ACME-Automation thermal devices.
384RAdapter™	384 well reaction plate adapter for ACME-Automation thermal adapters and devices.
Thermal 48™ MicroTube Rack	A thermal rack for use with ACME-Automation thermal devices.
Thermal 24 Capped™ 1.5mL MicroTube Rack	A 24 position Thermal rack in a titer format offset to accept 1.5mL capped or uncapped microfuge tubes.
Thermal 24 x .5 / .2 ™ PCR Micotube Rack	A 24 position Thermal rack in a titer format offset to accept .5mL .2mL capped or uncapped PCR tubes.
*Thermal Modular Reservoir Adapter*	A thermal Holder for Biomek 2000 Modular adapters. compatible with ACME-Automation
E&K 96 Thermal Rack *#CR7013* *$400.00*	This rack is used in conjunction with ACME-Automation Thermal devices. E&K Part number 671511 RC 1mL tubes.Block can be passively cooled and used for ~35 minutes at room temperature.
UBottom Thermal Adapter	This adapter improves thermal conductivity performance in round bottom plates, when used with ACME-Automation thermal devices.
Flat Plate Adapter *#C5077 $200.00*	This adapter is for Non- ACME-Automation thermal devices. i.e.(Biomek FX Thermal ALP) It is used to provide contact to the well bottom of all 96 and 384 well, Flat bottomed plates.
Filtration & Vacuum control
*BioDotAdapter*	A titer format holder for the BioDot apparatus. can be used on various liquid handlers. BioMek 2000 / FX compatible.
B.V.D. Basic Valve Driver	This Basic Valve Control system allows many liquid handlers to launch the Smartvalve™ software application that will control a vacuum valve with On, Off, and Timed control.
*A.V.D .™ Advanced Valve Driver*	The valve driver can control the pump power, Vacuum valve control for soft starting and initial pump down delay. all of this is user definable.
*TiterGarage™*	This dual purpose device is included with the Dynamifold™ system. It serves as holding area for the Dynamifold collar. It is also used to hold and cool titer plates of various styles at the same time .
*Dynamifold™*	The new self adjusting Vacuum filtration manifold system.
Misc. Accessories
*ACM.E-Stop™*	Many devices simply do not have a rapid means of disengaging power. Stop this unsafe condition by employing an ACM.E-Stop. A simple remote power disconnect. Pay for this product in one crash of your liquid handler.
*Tube Snake™*	A wash tubing guide and support for the Biomek 2000. This is what it should have come with. The cable guide eliminate pinches and crimping. By reducing slack in the tubing it helps to minimize dripping and can help improve delivery of the Wash 8 and Wash 1 tools.
*StraightPlate96™*	Flattens the surface of various PCR plate to allow for reliable pipetting and seal puncturing.
*Plate Claw™*	A microplate retention device. Can be used on various liquid Handlers. Holds plates firmly for seal puncturing and reliable tip extraction.

*Integrations*
Micro Mix 5 Shaker for Biomek2000 TECAN	A 2 position Shaker for use in Liquid handling applications. A command line driver software package allows for the automated use in various Liquid handlers. Contact ACME-Automation for details and Custom solutions.
*Smart Switch*	A serial controlled AC switch for control of various devices. i.e. Shakers Vacuum pumps, UV Lamps. A 10 amp switch is controlled via a Command line driver for simple On-Off control or timed operation.
MJ PTC200 Thermal Cycler	This integration can be adapted to multiple liquid handling platforms. You can pipette or Grip to the thermal Cycler then fire off any stored program for fully automated operation. A command line driver package allows unattended operation for maximum 'Walk-Away time'. Contact ACME-Automation for details and Custom solutions.